EIOBoard Punch Interface

• Simple and cheap in out board solution
• Minimal hardware needed
• Used with multiple input devices
• Works with existing HID hardware
• Control both door and status at the same time

Main Punch Screen

Main Screen

The key to a successful in/out board implementation is accuracy. What better way to keep it accurate without breaking your budget. The EIOBoard Punch Service and Interactive Tool is designed to change your status at the door without the need for an interactive display. 

Punch Interface & Hardware

Simple In Out Solution

The Punch Interface is simple and easy to setup, and with a couple of hardware components you can have a quick In -Out Punch Solution. You can have various configurable devices such as two HID cards - one labeled "In" and one labeled "Out" to adjust your status accordingly. The system supports the same devices as the Kiosk - the HID Card Reader, Fingerprint Reader, Magnetic Card Reader, and Barcode Scanner. The solution saves you from having to purchase an interactive PC and touch screen or Kiosk.

HID Wiegand Converter

Using Existing Hardware

In addition, you can leverage and tap into an existing HID reader as long as it supports Wiegand.  To do this, you just need to order a splitter or a Wiegand OEM module with Door Control from Savance.  The Wiegland Converter will integrate seamlessly into our Kiosk system. It is easy to install and can be setup in minutes.  Talk to us about your specific setup and objectives. Software is licensed for each PC where the software is installed.